Location:Home > News information > Solution > 正文
Contact
Dongguan Baoding Precision Instrument Co. Ltd.
Miss.Cai 13717346368
Telephone: 0769-85588096Fax: 0769-82688299
Email: 13717346368@163.com
URL: www.baodingyiqi.com
Address: No. nine Park Avenue, Houjie Town, Guangdong, Dongguan, China, No. 23
How to solve the small trouble of the small mixer?
How to solve the small trouble of the small mixer?
The mixer is used for mixing equipment rubber in rubber products factory is an indispensable equipment in the use of mixer process such as failure is usually notice mixer manufacturers to come to repair, such as some small faults we can solve, do not have to wait for the mixer manufacturer, so to reduce the cost of time.
Can we repair the problems ourselves?
1, the mixer fixed ring and moving coil contact surface is uneven, forming the sealing oil film
We can remove the mixer fixed ring check, drag the contact surface without injury, while the contact rate is low, the need to run, the running time is more than 4-8h, the contact surface can not be broken when running oil
2, the compact motor ring, fixed ring between the hard particles, pull the contact surface, so that the contact surface can not form the sealing oil film
If the moving coil is pulled out, it needs to be grinded and repaired by a whetstone, and special equipment is needed when grinding. The fixing ring is in two halves, and can be disassembled and ground for grinding. Fixed ring plane grinding moving coil and good will, the fixed ring is assembled, the slow grinding hours, grinding lubricant
3 、 alloy coil fall in mixer
You can then set to replace the coil, coil number running hours, can be solved
Reminder：
If your mixer equipment failure, be sure to check the cause of the failure, as far as possible professional maintenance, do not remove without permission!
The mixer is used for mixing equipment rubber in rubber products factory is an indispensable equipment in the use of mixer process such as failure is usually notice mixer manufacturers to come to repair, such as some small faults we can solve, do not have to wait for the mixer manufacturer, so to reduce the cost of time.
Can we repair the problems ourselves?
1, the mixer fixed ring and moving coil contact surface is uneven, forming the sealing oil film
We can remove the mixer fixed ring check, drag the contact surface without injury, while the contact rate is low, the need to run, the running time is more than 4-8h, the contact surface can not be broken when running oil
2, the compact motor ring, fixed ring between the hard particles, pull the contact surface, so that the contact surface can not form the sealing oil film
If the moving coil is pulled out, it needs to be grinded and repaired by a whetstone, and special equipment is needed when grinding. The fixing ring is in two halves, and can be disassembled and ground for grinding. Fixed ring plane grinding moving coil and good will, the fixed ring is assembled, the slow grinding hours, grinding lubricant
3 、 alloy coil fall in mixer
You can then set to replace the coil, coil number running hours, can be solved
Reminder：
If your mixer equipment failure, be sure to check the cause of the failure, as far as possible professional maintenance, do not remove without permission!
