Simple operation procedure of Laboratory Mixer

1 Purpose: to test the mixing and out of rubber
2 equipment: Small Laboratory Mixer
3 operation procedure: please open the cooling water valve before starting the operation, and clean the machine with the cleaning glue
3 mixing or out of the process; open the mixer switch, press the brake on the brake when open, open the upper baffle to open the mixer between the two rollers, put down the baffle, press start to start the car wash. In the whole process of washing the car should be placed in the hands of the lower part of the roller, must not cross the tailgate, cleaning the beginning of the following process;
3 according to their own kind of rubber to adjust the appropriate distance between rollers and the distance between the left and right baffle, put the rubber into the two roller, put down the baffle;
4 press the brake when, press start when, in accordance with the procedures for the film or mixing;
4 the whole process should not be crossed over the baffle, the lower part of the drum;
5 the end of the process, turn off the power supply. The whole process should pay attention to the protection of the environment, to minimize dust pollution to the surrounding environment, after the end of the experiment to clean up the surrounding health. In order to ensure the safety of the valve switch and power switch off.