Location:Home > News information > Industry news > 正文
Contact
Dongguan Baoding Precision Instrument Co. Ltd.
Miss.Cai 13717346368
Telephone: 0769-85588096Fax: 0769-82688299
Email: 13717346368@163.com
URL: www.baodingyiqi.com
Address: No. nine Park Avenue, Houjie Town, Guangdong, Dongguan, China, No. 23
What should be paid attention to when using the double roll open mill
Double roll open mill, also known as plastic tablet press, is mainly used for color contrast test of experimental tablet press. Please pay attention to:
1. The surface of the double roller of the mill cannot be let go. It is scratched by hard objects: some manufacturers use materials again, which may contain impurities. Stones, scrap iron and other things must be cleaned to avoid damaging the surface of the double roller. If there are scratches on the surface of the improper roller, the pressed sheet will be uneven and smooth, affecting the color or test.
2. There are skills to set the temperature stability: take 150 degrees as an example, do not set 150 degrees at a time when setting the timing, so the temperature will rise quickly, but the stability will be relatively slow. At the beginning, set 120 degrees, and then raise the temperature when the temperature reaches 120 degrees, until 150 degrees, it will soon be stable.
3. Find out the forward rotation, reverse rotation and emergency stop functions of the double roll open mill. It's not bad in an emergency. Special attention shall be paid to safety when using the open mill. In case of danger, press the "emergency stop" or "roller reverse" button immediately to stop the whole machine or reverse the roller.
4. When the operation of the double roller open mill is completed, the sample shall be taken down with wood or bamboo products, instead of being scratched on the surface of the double roller with metal products, so as to avoid damaging the surface; when the sample is finished, the surface of the roller shall be cleaned with cotton cloth and coated with corresponding protective oil, so as to facilitate the normal operation of the next time. The temperature of the two rollers of the open mill shall be controlled respectively, and appropriate temperature shall be set as required to facilitate the preparation It is convenient, fast, flat and smooth. The product structure design is reasonable, and it is convenient to replace the damaged consumables. The buyer can replace it by himself. The machine is equipped with forward rotation, reverse rotation and emergency stop functions, which can guarantee the safety of the operator. This open mill should be placed in a ventilated and dry place as far as possible, so as to extend its service life. It is necessary to clean the two rollers of the double roller open mill, generally clean them with cotton cloth, and then apply oil Protect the surface for next use.
Double roll open mill, also known as plastic tablet press, is mainly used for color contrast test of experimental tablet press. Please pay attention to:
1. The surface of the double roller of the mill cannot be let go. It is scratched by hard objects: some manufacturers use materials again, which may contain impurities. Stones, scrap iron and other things must be cleaned to avoid damaging the surface of the double roller. If there are scratches on the surface of the improper roller, the pressed sheet will be uneven and smooth, affecting the color or test.
2. There are skills to set the temperature stability: take 150 degrees as an example, do not set 150 degrees at a time when setting the timing, so the temperature will rise quickly, but the stability will be relatively slow. At the beginning, set 120 degrees, and then raise the temperature when the temperature reaches 120 degrees, until 150 degrees, it will soon be stable.
3. Find out the forward rotation, reverse rotation and emergency stop functions of the double roll open mill. It's not bad in an emergency. Special attention shall be paid to safety when using the open mill. In case of danger, press the "emergency stop" or "roller reverse" button immediately to stop the whole machine or reverse the roller.
4. When the operation of the double roller open mill is completed, the sample shall be taken down with wood or bamboo products, instead of being scratched on the surface of the double roller with metal products, so as to avoid damaging the surface; when the sample is finished, the surface of the roller shall be cleaned with cotton cloth and coated with corresponding protective oil, so as to facilitate the normal operation of the next time. The temperature of the two rollers of the open mill shall be controlled respectively, and appropriate temperature shall be set as required to facilitate the preparation It is convenient, fast, flat and smooth. The product structure design is reasonable, and it is convenient to replace the damaged consumables. The buyer can replace it by himself. The machine is equipped with forward rotation, reverse rotation and emergency stop functions, which can guarantee the safety of the operator. This open mill should be placed in a ventilated and dry place as far as possible, so as to extend its service life. It is necessary to clean the two rollers of the double roller open mill, generally clean them with cotton cloth, and then apply oil Protect the surface for next use.
