Location:Home > News information > Industry news > 正文
Contact
Dongguan Baoding Precision Instrument Co. Ltd.
Miss.Cai 13717346368
Telephone: 0769-85588096Fax: 0769-82688299
Email: 13717346368@163.com
URL: www.baodingyiqi.com
Address: No. nine Park Avenue, Houjie Town, Guangdong, Dongguan, China, No. 23
The point of attention for operating a small mixer
The point of attention for operating a small mixer
1. machine operators must undergo safety education, technical training, familiar with the operating procedures of the equipment before they can mount guard;
2. before the machine, operators should wear the provisions of labor insurance products;
3. the machine must be checked before cleaning, hinder the operation of the debris around the machine equipment;
4. keep the work area neat and tidy, the road is clear, turn on the ventilation equipment (air exhauster), keep the workshop air circulation;
5. open the water supply, gas supply, oil supply valve, check the water gauge, water meter, oil pressure gauge is normal;
6. boot test operation, found abnormal sound or other faults, should stop immediately;
7. check the material door, the top bolt, whether the hopper can open properly;
8. whenever the top plug is raised, the top pin must be pushed and the knob moved to the raised position;
9. in the process of kneading, it is found that there is a phenomenon of sticking material. It is operated with a top rod or other tools, and it is forbidden to dig the materials directly by hand;
When the 9. hopper is turned over and unloaded, the pedestrian and the vicinity of the hoist are forbidden to approach the pedestrians;
The top bolt must be raised before the 10. machine, the hopper is turned back, and the material door is closed to power off;
11. after the end of the work, turn off all power, water, gas, oil source.
Dongguan Baoding Precision Instrument Co., Ltd was founded in 1999, products include rubber, plastics, footwear, chemical industry, main products: laboratory flat vulcanizing machine, pressing machine, mixing machine, mixer machine, film blowing machine, extrusion machine etc..
Company R & D and manufacturing as a whole, using the German advanced technology, the introduction of high-tech talent, the establishment of modern enterprise system, and constantly improve the management, development and constantly develop new products, its technical content, the degree of automation is the national leading level. At the same time, the company's internal strengthening of management, foreign attention to good faith, high-quality products to win customers at home and abroad alike.
Contact: Mr. Ning, 13532886368
Telephone: 0769-85588096
Fax: 0769-82688299
Q Q:799728999
Mailbox: 13532886368@163.com
URL: http://www.baodingyiqi.com
Address: No. 27, nine Garden Avenue, Houjie Town, Guangdong, Dongguan
1. machine operators must undergo safety education, technical training, familiar with the operating procedures of the equipment before they can mount guard;
2. before the machine, operators should wear the provisions of labor insurance products;
3. the machine must be checked before cleaning, hinder the operation of the debris around the machine equipment;
4. keep the work area neat and tidy, the road is clear, turn on the ventilation equipment (air exhauster), keep the workshop air circulation;
5. open the water supply, gas supply, oil supply valve, check the water gauge, water meter, oil pressure gauge is normal;
6. boot test operation, found abnormal sound or other faults, should stop immediately;
7. check the material door, the top bolt, whether the hopper can open properly;
8. whenever the top plug is raised, the top pin must be pushed and the knob moved to the raised position;
9. in the process of kneading, it is found that there is a phenomenon of sticking material. It is operated with a top rod or other tools, and it is forbidden to dig the materials directly by hand;
When the 9. hopper is turned over and unloaded, the pedestrian and the vicinity of the hoist are forbidden to approach the pedestrians;
The top bolt must be raised before the 10. machine, the hopper is turned back, and the material door is closed to power off;
11. after the end of the work, turn off all power, water, gas, oil source.
Dongguan Baoding Precision Instrument Co., Ltd was founded in 1999, products include rubber, plastics, footwear, chemical industry, main products: laboratory flat vulcanizing machine, pressing machine, mixing machine, mixer machine, film blowing machine, extrusion machine etc..
Company R & D and manufacturing as a whole, using the German advanced technology, the introduction of high-tech talent, the establishment of modern enterprise system, and constantly improve the management, development and constantly develop new products, its technical content, the degree of automation is the national leading level. At the same time, the company's internal strengthening of management, foreign attention to good faith, high-quality products to win customers at home and abroad alike.
Contact: Mr. Ning, 13532886368
Telephone: 0769-85588096
Fax: 0769-82688299
Q Q:799728999
Mailbox: 13532886368@163.com
URL: http://www.baodingyiqi.com
Address: No. 27, nine Garden Avenue, Houjie Town, Guangdong, Dongguan
