Location:Home > News information > Industry news > 正文
Contact
Dongguan Baoding Precision Instrument Co. Ltd.
Miss.Cai 13717346368
Telephone: 0769-85588096Fax: 0769-82688299
Email: 13717346368@163.com
URL: www.baodingyiqi.com
Address: No. nine Park Avenue, Houjie Town, Guangdong, Dongguan, China, No. 23
Code for safety operation of small flat vulcanizing machines
Code for safety operation of small flat vulcanizing machines
1, when the sample is cut with vulcanized board, the rubber plate must be protected.
2, no rise in the flat when taking the mold or cleaning debris.
3, all the mold into the flat must be centered, send mold, gloves should be taken to prevent burns.
4, do not exceed the prescribed temperature using flat vulcanizing machine.
5, strictly prohibit the backlog of uneven plates in the plate.
6, equipment failure, you must cut off the power supply and then do the processing.
7, test the film when the mold, open the mold, beware of smashing hands, to prevent landing.
8, when not in use, cut off the power supply, put down the pressure, close the oil valve.
9, take the test film from the mold, pay attention to the cavity and the smooth surface of the mold, protect against scratches.
10. Adjust the pressure gauge according to the die size and the unit pressure, forbid the over pressure vulcanization.
Dongguan Baoding Precision Instrument Co., Ltd was founded in 1999, products include rubber, plastics, footwear, chemical industry, main products: laboratory flat vulcanizing machine, pressing machine, mixing machine, mixer machine, film blowing machine, extrusion machine etc..
Contact: Mr. Ning, 13532886368
Telephone: 0769-85588096
Fax: 0769-82688299
Q Q:799728999
Mailbox: 13532886368@163.com
URL: http://www.baodingyiqi.com
Address: No. 27, nine Garden Avenue, Houjie Town, Guangdong, Dongguan
1, when the sample is cut with vulcanized board, the rubber plate must be protected.
2, no rise in the flat when taking the mold or cleaning debris.
3, all the mold into the flat must be centered, send mold, gloves should be taken to prevent burns.
4, do not exceed the prescribed temperature using flat vulcanizing machine.
5, strictly prohibit the backlog of uneven plates in the plate.
6, equipment failure, you must cut off the power supply and then do the processing.
7, test the film when the mold, open the mold, beware of smashing hands, to prevent landing.
8, when not in use, cut off the power supply, put down the pressure, close the oil valve.
9, take the test film from the mold, pay attention to the cavity and the smooth surface of the mold, protect against scratches.
10. Adjust the pressure gauge according to the die size and the unit pressure, forbid the over pressure vulcanization.
Dongguan Baoding Precision Instrument Co., Ltd was founded in 1999, products include rubber, plastics, footwear, chemical industry, main products: laboratory flat vulcanizing machine, pressing machine, mixing machine, mixer machine, film blowing machine, extrusion machine etc..
Contact: Mr. Ning, 13532886368
Telephone: 0769-85588096
Fax: 0769-82688299
Q Q:799728999
Mailbox: 13532886368@163.com
URL: http://www.baodingyiqi.com
Address: No. 27, nine Garden Avenue, Houjie Town, Guangdong, Dongguan
